Call Today

 

We've encountered the article about No Hot Water — Water Heater Repair listed below on the net and felt it made good sense to discuss it with you in this article.

Many modern residences take advantage of an electrical hot water heater for their heating unit, because of its benefit and ease of use. However, similar to any other electric home appliances, problems might emerge with its use, suddenly. It can be really aggravating to wake up to a cool shower rather than a hot one or having your bathroom with water that isn't warm enough or perhaps also hot. Whatever the case may be, hot water heater issues can be quite aggravating. Luckily, we've made a checklist of possible solutions to your hot water heater concerns. There are a number of factors that might cause many of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for security. Whatever the problem is, getting it taken care of ought to not posture excessive of a concern if you comply with these steps:

 

Call A Specialist:

If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might require to speak to a professional plumber for a specialist opinion. The trouble with your heater could be that the cold and hot faucets have been switched over or it may be undersized for the quantity of hot water required in your house. Whatever the case might be, a specialist plumber would aid solve the issue.

 

Examine Your Power Supply:

As standard as this might seem, it is really necessary. Without appropriate power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power issue. Inspect if the fuse is blown out or the breaker stumbled. If the breaker is the issue, just turn it on and off again. Replace any broken or damaged fuse. Examine the home appliance with power after these adjustments to see if it's now working.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't hot enough, you might require to inspect the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open up the access panel as well as press the red switch for temperature level reset over the thermostat. This need to assist heat up the water. Transform the breaker back on and also examine if the trouble has actually been resolved.

 

Examine the Burner in the Water Heater:

If it's not a power issue, then attempt checking out your burner if it is still functioning. Evaluate each of your heating elements to ensure the trouble isn't with any of them. If any of them is defective, change that component and afterwards inspect whether the warm water is back on.

 

Verdict

Hot water heater problems are not constantly significant. A lot of them are because of minor issues like a blown fuse or damaged burner. Replacing the damaged parts ought to work. However, if you are still incapable to solve the trouble, give a call to your local plumber to find to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you enjoyed reading our excerpt about How to Troubleshoot and Repair an Electric Water Heater. Thanks for taking the time to read through our post. Sharing is good. Helping people is fun. I love reading our article about No Hot Water — Water Heater Repair.

Act immediately.